PERIODIC MAINTENANCE AND INSPECTION OF THE ELECTRICAL CABINET SYSTEM

Like any mechanical product, long-term products such as electrical panels need to be checked and maintained regularly. This not only makes the product DURABLE and long lasting, but also ensures SAFETY for users.

PERIODIC MAINTENANCE AND INSPECTION OF THE ELECTRICAL CABINET SYSTEM IS ESSENTIAL

Like any mechanical product, long-term products such as electrical panels need to be checked and maintained regularly. This not only makes the product DURABLE and long lasting, but also ensures SAFETY for users. Detecting failures promptly and handling them quickly is essential in electrical engineering. 
It cannot be said that the electrical cabinet is placed in a closed room, less affected by humans and the environment, without paying attention to regular inspection. However, it is necessary to strictly comply with electrical safety when performing maintenance checks. BHT suggests the following steps:
: You should turn off the master circuit breaker first to avoid electrical problems. Check the insulation of the tool.

: After turning off the power, we proceed to maintain the cabinet frame: clean the cabinet frame. Use a rag to carefully clean the cabinet frame. Check the headlight lights and the phases to see if they have enough power. Check the signs to see if they are peeling or fading.

: Maintenance inside the cabinet: check the drawing for fading. Conduct a check of electrical equipment inside the cabinet

: Use a vacuum cleaner to suck up all the dust. Use a broom to sweep away all the dirt inside the cabinet. Then, check the screws of the electric meter. screws of the aptomat

: After checking, turn the power back on

: We use an electric meter to check the voltage of the phases. We set the meter to AC voltage. Measure the voltage of the phases. Check the relay

: Once done, close the cabinet.

: Fill in the electrical cabinet maintenance form. Take note of any problems that arise and promptly notify technical staff to fix any problems.